Which Drill Point Angle Should I be Using?

The selection of an appropriate drill point angle for your bit should be informed by questions about your application. Yes, a hole is a hole is a hole, and while some angles are more common than others, there is no true standard drill point angle. Instead, consider what is the purpose of the hole, what type of metal are you cutting into, and what are the specifications for the finished hole?

In addition to the drill point angle, factors that can affect successful drilling include:

  • Rigidity
  • Speed
  • Length of the Drill
  • Coolant Flow
  • Type of Drill Point

There are two main characteristics that define a drill point for metal.  First is the included angle of the point and the second is the configuration of the point.  The point configuration is a key element in the choice of drill styles for a particular job.

Common Drill Angles

The most common included angles for drills are 118° and 135°.  These angles are an artifact from the time when drilling was largely a manual process, and the drill bits were conventional conical shapes.  Over time, tool makers learned that by grinding a conical point with a flat surface (a facet) to create a linear chisel, they could reduce the thrust required and also improve the process of cutting the metal or wood and removing the chips.  If you’re drilling by hand, this is a clearly a major benefit.

Today, with advanced drilling machines, multi-faceted drill points are the norm.  Not only do they require 50% less thrust, but they also generate 60% less heat than a conventional drill point. And there are a number of different configurations, each of which—when combined with a particular drill point angle—is suitable for specific jobs.

The general purpose drill points found on most jobber drills are 118° angled drills. They are typically used for cutting into soft metals such as aluminum, whereas the 135° variant is best suited for hardened materials, such as stainless steel. A 135° drill is flatter than 118°, which means that more of its cutting lips engage with the material surface sooner to begin the full metal cutting action. Check out our drill point angle chart below for what angles are optimal based on the material that is being drilled: 

 
(Click Image to expand) 
 

There are a number of drill point configurations and these may be found in both 118° and 135° variants.  The different configurations are selected based on the drilling application—for example:

  • Are you cutting into hard metal or soft?
  • Is self-centering possible or will a guide bushing be needed? 

Specialized Drill Point Configurations

Conventional points with 118° point angles are used most commonly for drilling in a wide array of materials.  Other drill point configurations include:

Notched Point

 

Notched points: were developed for drilling hard alloys and have reduced drag on the chisel edge.
Helical Point

 

Helical points: have an S-contoured chisel that is self-centering and cuts close to actual drill diameter.
Racon Point

 

Racon® points: have a continuously varying point angle that generates less load and less heat while cutting into the metal and have a longer usage life. However, Racon points are not self-centering and must be used with a guide bushing.
Bickford Point

 

Bickford™ points: combine the features of the Helical and Racon points—self-centering, long life, burr-free breakthrough and higher feed capacity.Nowadays, there are few excuses for not seeking and using the right point configuration for the job.  Specialist companies make drill pointing equipment and have the skill to provide many other style points for tough applications.

There’s an old proverb “A bad workman always blames his tools,” which means that success is not dependent on the tools we use, but how we use them.  In the case of drill points, that may not be 100% true.  While you can drill a hole with almost any drill point, the one you use may not be the best for the whole job, whether you are drilling one hole, a hundred holes, or thousands!  By choosing the right drill point configuration and included angle, you can receive longer tool life, more precise hole geometry, cleaner breakthrough and improved job productivity.

If you have questions about the right drill point for your job, just ask us at Regal Cutting Tools